Installation day tends to be the part homeowners feel least prepared for - not because it's complicated, but because nobody walks you through it ahead of time. Here's exactly what to expect before, during, and after your flooring installation, from prep the night before to the final walkthrough.
Before the Crew Arrives: What to Prep
The single biggest thing you can do to keep your project on schedule is have the work area fully cleared before the crew shows up. That means furniture moved out of the room (or moved to the center and covered, if arranged in advance), closets emptied if flooring is going under closet doors, and breakables and electronics removed from the space entirely - vibration from removal and installation tools can jostle things off shelves in adjoining rooms too.
- Clear the room completely, including wall art and anything on shelves that could shake loose.
- Put pets in a separate part of the house or, ideally, offsite for the day - power tools and open doors make for stressful, unsafe conditions for animals.
- Unplug and move electronics, including anything wired into the wall in the work area.
- Clear a path from the driveway to the work area - crews are hauling material and old flooring in and out all day.
- Let us know about any parking restrictions or building access details ahead of time, especially for Portland-area condos or apartments.
Day One: Removal and Subfloor Prep
If you're replacing existing flooring, the first stage is removal - pulling up old carpet, prying out old tile, or cutting out laminate or vinyl - and hauling it out. What's underneath gets inspected next. This is the point where we find out if the subfloor needs leveling compound, if there's squeaking that needs to be screwed down before new flooring goes over it, or - occasionally, in an older Maine home - some moisture or rot that needs to be addressed before anything new goes down. We'll always show you what we find and talk through it before proceeding, rather than surprise you with a change order after the fact.

The Install Itself: What the Crew Is Actually Doing
Once the subfloor is ready, the actual installation moves at a steady, methodical pace - it looks slower than it is, because getting seams tight, transitions level, and patterns aligned takes care. For hardwood and laminate, that means acclimating material to the room beforehand, laying it in a consistent direction with staggered seams, and fitting it tightly around vents, doorways, and cabinetry. For tile, it's substrate prep, dry-laying the pattern first, then setting and grouting in sections. For carpet, it's stretching the material drum-tight over the padding using a power stretcher, not just tacking it down loose at the edges - a properly stretched carpet is what keeps it from rippling within a year.
Trim, transitions, and thresholds between rooms go in last, once the field of flooring is fully set. This is also usually when baseboards or shoe molding get reinstalled if they were removed for the job.
Timeline by Project Size
| Project | Typical Timeline |
|---|---|
| Single room (bedroom, small living room) | 1 day |
| Multiple rooms / full main level | 2 - 3 days |
| Whole-house project | 3 - 5 days |
| Tile with grout cure time | Add 1 - 2 days before heavy foot traffic |
These are typical ranges for a straightforward install - a whole-house hardwood install, extensive subfloor repair, or a large tile pattern layout can extend timelines. We'll give you a specific estimate for your project at your in-home visit, not a generic range.
Ready to put a date on the calendar?
Schedule your free in-home estimateCleanup and the Final Walkthrough
Before the crew leaves, they clean the work area - sweeping, vacuuming, and hauling away all debris and old flooring material, unless you've arranged otherwise. Then you'll get a full walkthrough of the finished floor together: checking seams, transitions, and any spots you want a closer look at. This is your moment to ask questions and flag anything before the crew packs up, not two weeks later. For tile especially, we'll let you know when it's safe for regular foot traffic versus when the grout is fully cured for heavier use.
Furniture typically goes back the same day for most rooms, though we'll tell you if anything - like a freshly finished hardwood floor - needs extra dry time before rugs or heavy furniture go back down. If felt pads aren't already on your furniture legs, this is a good day to add them, especially on new hardwood or luxury vinyl plank.
Knowing what's coming makes installation day a lot less stressful - and after nearly forty years installing floors across Greater Portland, we've got the process down to a science. See what customers say about working with our crew on our reviews page, or reach out to schedule your free estimate and get a date on the calendar.





